DAIKIN RP23C11JA-37-30 Rotor Pump

G1 - Heat Generation Factor (Roller-Raceway)10:49.1; Aa - Cage-Cone Backface Clearance:0.07 in; Design Units:Imperial; db - Cone Backface Backing Diameter:2.17 in; Cg - Geometry Factor11:0.0946; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:6290 lbf; d:1.7500 in; G2 - Heat Generation Factor

C:12.8 kN; J:89.5 mm; A:20 mm; Recommended tightening torque for set screw:3.7 Nm; H1:35 mm; S:7.5 mm; A2:34.4 mm; H:92 mm; Weight:0.55 kg; d:19.05 mm;

H:102 mm; Designation of housing:ST207-; Weight:1.67 kg; s1:21.45 mm; L3:64 mm; S:17.5 mm; T min.:-20 °C; N2:37 mm; d:34.92 mm; N1:16 mm;

Rolling Element Material:Steel; Rolling Element Material:Steel; Load Direction:Thrust; Revolution Frequency(rpm):400; Days to Ship:9 Days or more; Specifications/Environment:Standard; Load Direction:Thrust; Inner/Outer Ring Material:Steel; Inner/Outer Ring Material:Steel; D:170;

Number of Bearings:Single; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Number of Bearings:Single; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Bearing Retained:No; Seals:VV (Non-Contact Rubb; Width T(mm):9;

Cr - Dynamic Load Rating:426238 lbf; Seal Type:Felt Seal; Dimension H:7.1 in; Note:This product line wa; Bearing Number:HSM250BX; Dimension L:13.0 in; Support Type:Round Flange; Dimension T:35.0 in; Bearing Type:Split Cylindrical Ex; Dimension V:0.3 in;

D:105; RoHS:6; Rolling Element Material:Steel; Outer Ring Shape:Flat; B:16; Number of Raceway Ring Rows:Single Row; Size Standards:Metric System; d:75; Type:Ball; Grease symbol:/2AS;

Volume Discount:Available; Allowable Rotational Speed(rpm):1500; d:12; Width B (or T)(mm):8; Basic Load Rating Cr (Dynamic)(N):102; Size Standards:Metric Series; D:28; Volume Discount:Available; Specifications, Environment:Standard / Heat Resi; Seal Part Structure:Double Shielded;

A:40 mm; H2:101 mm; C:12.8 kN; Designation of bearing:EX202-10G2T20; B1:43.5 mm; H1:15 mm; S:17 mm; H:70 mm; G:M6x1; L:127 mm;

H2:62 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; C:12.8 kN; H:30.2 mm; H1:11 mm; A:40 mm; J:52 mm; C0:6.65 kN; L1:22 mm;

B:43.5 mm; C0:23.2 kN; T min.:-20 °C; A:40 mm; Dz:100 mm; d:50 mm; C:35.1 kN; Designation of bearing:US210G2T20; T max.:200 °C; Designation of housing:FL210N-;

D:71.996 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2080 lbf; Y - ISO Factor9:1.57; Design Units:Imperial; Cup Part Number:14282; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; Cage Type:Stamped Steel; Series:14000; r - Cup Backface To Clear Radius2:1.52 mm; B - Cone

Max operating temperature, Tmax:200 °C; D1:249.7 mm; Radial clearance class:CN; rs min:2.1 mm; Mass:21.55 kg; ra max:2 mm; d:170 mm; Number of lubrication holes:3; Characteristic outer ring frequency, BPF0:9.62 Hz; Static load, C0:1,700 kN;

Dz:100 mm; SW:4.76 mm; B:51.6 mm; d:49.21 mm; Recommended tightening torque for set screw:16.8 Nm; L1:260 mm; T min.:-20 °C; Designation of housing:SP208-210/90N-; A5:32.6 mm; Designation of closed end cover:SCC210;

Bearing Unit, Type:Pillow Type; Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):23300; Pillow Type, Category:Centre Height; Accessory:No Cover; Diameter series symbol:Used for Light load; Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Silicone; Fit:J7; Machining:Oil-free type;